Makita 18V 1/2″ Impact Wrench/Drill

Tired of smashing your knuckles when trying to remove tight nuts and bolts?

Risk the small price of 1.49 to save your knuckles!!!

Tickets are only 1.49 and limited to 500, This is an autodraw which means it will draw as soon as it sells out, no waiting around! If however it doesn’t sell out the competition close on the 5th July at 7pm and will draw straight away then. Good Luck!

Includes:

1 x DTW1004Z 18V LXT Brushless 1/2″ Impact Wrench

2 x BL1830B 18V LXT 3.0Ah Li-ion Batteries

1 x DC18RC 14.4-18V Lithium-ion Battery Charger

1 x Makpac Type 3 Connector Case

Item Spec Below:

Driving Shank 1/2″ (12.7mm) Square, pin-detent

3 stage impact power selection

Reverse switch

Twin LED

Variable speed control by trigger

Electric brake

BL motor

Specification:

Nominal Battery Voltage – 18 V

Voltage LXT – Yes

Max Fastening Torque Impact Drill: 170 / 250 / 1050 Nm

No load speed: 0 – 900 / 1000 / 2000 min⁻¹

Impacts per Minute (IPM): 0 – 1800 / 2000 / 2400 min⁻¹

Drive Square – 1/2 “

Tightening Capacity Standard Bolt: M12 – M30

Tightening Capacity High Tensile Bolt: M16 – M24

Sound Power Level (LWA) – 106 dB(A)

Sound Pressure Level (LpA) – 98 dB(A)

Noise Uncertainty (K Factor) – 3 dB(A)

Tool weight with battery: 3,1 – 3,4 kg

Product Dimensions (L x W x H): 261 mm x 99 mm x 254 mm

Brushless Motor – Yes

Nut-busting torque – 1300 Nm

Max Output Power – 620 W

Vibration Level, Impact Tightening of Fasteners of the Maximum Capacity of the Tool – 18,4 m/s²

Vibration Uncertainty (K Factor), Impact Tightening of Fasteners of the Maximum Capacity of the Tool – 1,7 m/s²

Product net weight – 2,7 kg