FESTOOL 576820 CORDLESS TABLE SAW CSC SYS 50 EBI-BASIC NAKED
activeFigures checked 1h ago
P
PTM Prizes
Usually draws around 80% sold
£3.67
per ticket
92 / 675 tickets sold
14%
Odds per ticket: 1 in 675
41 · Fair value per 1% chance, ranked against every scoreable raffle live on the site
Estimate your odds
or enter:
min 1, max 583
Total cost:
£3.67
Your chance:
0.1481%
(1 in 675)
For illustration only. PrizeOn doesn't run, sell tickets for, or take part in this draw. Your chance is worked out against all 675 tickets; if fewer sell before the draw, it is better than shown. Actual entry happens on their site.
Ends In
Calculating...
Description
YOUR CHANCE TO WIN THIS FESTOOL 576820 CORDLESS TABLE SAW CSC SYS 50 EBI-BASIC NAKED
Versatile: Parallel cuts up to 280 mm; cross cut width of up to 450 mm. Angled cuts from -2° to 47°.
Practical: At a cutting height of up to 35 mm, through to angled cuts right down to -10°; ideal for undercutting infill panels.
Compact and mobile: Can be transported with one hand in the practical Systainer format. Even lighter with the UG-CSC-SYS underframe (Sold separately).
Extreme precision: The height and angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimetre.
Reproduce cuts easily: The height and angle (mm and inches) are set parallax-free via the digital display, i.e. more accurately than any visual judgement. Reproducible cuts are ensured.
Convenient: Four saw blade positions can be saved and selected via the digital display.
Highly precise parallel side fence: Robust parallel side fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results.
Highly precise angle stop: The angle stop is optimally aligned and centrally clamped via a groove on the slide. For mitre angles between -70° and +70°
Absolutely judder-free: Ball bearing-mounted slide for parallel and angled cuts with maximum precision
Powerful: The brushless EC-TEC motor with high speeds of 6800 rpm guarantees fast sawing progress and perfect cutting results
Long-lasting: The combination of a brushless EC-TEC motor and a dual battery system with two 18 V battery packs (from 4.0 Ah) ensures a long operating performance
Long-lasting: The brushless EC-TEC motor is long-lasting, robust and maintenance-free
Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital display
Dust-free: Chip collection bag for dust-free work, even without a mobile dust extractor
Healthy working with a system: Ideal also in combination with the Festool cordless extractors
Compatible: Fits together with the entire Festool Systainer system and bott vehicle equipment
Battery Voltage – 2 x 18v
Idle Engine Speed – 4500 – 6800 min-1
Saw Blade Location Hole – 20mm
Cutting height 0° - 0 - 48mm
Cutting height 45° - 0 – 34mm
Cutting height -10° - 21 – 32mm
Mitre Angle – 0 - 70°
Versatile: Parallel cuts up to 280 mm; cross cut width of up to 450 mm. Angled cuts from -2° to 47°.
Practical: At a cutting height of up to 35 mm, through to angled cuts right down to -10°; ideal for undercutting infill panels.
Compact and mobile: Can be transported with one hand in the practical Systainer format. Even lighter with the UG-CSC-SYS underframe (Sold separately).
Extreme precision: The height and angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimetre.
Reproduce cuts easily: The height and angle (mm and inches) are set parallax-free via the digital display, i.e. more accurately than any visual judgement. Reproducible cuts are ensured.
Convenient: Four saw blade positions can be saved and selected via the digital display.
Highly precise parallel side fence: Robust parallel side fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results.
Highly precise angle stop: The angle stop is optimally aligned and centrally clamped via a groove on the slide. For mitre angles between -70° and +70°
Absolutely judder-free: Ball bearing-mounted slide for parallel and angled cuts with maximum precision
Powerful: The brushless EC-TEC motor with high speeds of 6800 rpm guarantees fast sawing progress and perfect cutting results
Long-lasting: The combination of a brushless EC-TEC motor and a dual battery system with two 18 V battery packs (from 4.0 Ah) ensures a long operating performance
Long-lasting: The brushless EC-TEC motor is long-lasting, robust and maintenance-free
Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital display
Dust-free: Chip collection bag for dust-free work, even without a mobile dust extractor
Healthy working with a system: Ideal also in combination with the Festool cordless extractors
Compatible: Fits together with the entire Festool Systainer system and bott vehicle equipment
Battery Voltage – 2 x 18v
Idle Engine Speed – 4500 – 6800 min-1
Saw Blade Location Hole – 20mm
Cutting height 0° - 0 - 48mm
Cutting height 45° - 0 – 34mm
Cutting height -10° - 21 – 32mm
Mitre Angle – 0 - 70°
Related Raffles
FESTOOL 577775 KSC60 EB-BASIC CORDLESS SLIDING COMPOUND MITRE SAW NAKED
PTM Prizes 50 · Fair
100 / 375 sold27%
checked 1h ago
WIN A SET OF HOPETECH V6Ti Mono Edition
Jacked Competitions
checked 2h ago
Win this Bosch 7 Piece Professional Combo kit With 3 x 4.0Ah Batteries, Charger & Tool Bag
Dream Car Giveaways Verified 47 · Fair
0 / 22,733 sold0%
checked 2h ago
Korum Digital Weighing Scales
Capital Catch Competitions 96 · Excellent
12 / 279 sold4%
checked 1h ago